INSTALLING FROM CD-ROM


	Following are instructions for installing various products 
from a pre-mounted CD-ROM onto a VAX/VMS or AXP/VMS platform:


		Product Name			Description
		------------         ---------------------------------
Rdb		DBARDBVMS052	 --> DBAnalyzer V5.2 for Rdb on VAX/VMS
Products	DBARDBVMS039     --> DBAnalyzer V3.9 for Rdb on VAX/VMS
		DBARDBVMS060	 --> DBAnalyzer V6.0 for Rdb on VAX/VMS

		DBARDBAXP053	 --> DBAnalyzer V5.3 for Rdb on AXP/VMS
		DBARDBAXP052	 --> DBAnalyzer V5.2 for Rdb on AXP/VMS	
		DBARDBAXP039	 --> DBAnalyzer V3.9 for Rdb on AXP/VMS
		DBARDBAXP060	 --> DBAnalyzer V6.0 for Rdb on AXP/VMS

		DBARDBITA060	 --> DBAnalyzer V6.0 for Rdb on I64/VMS

		DBTRDBVMS052	 --> DBTune V5.2 for Rdb on VAX/VMS
		DBTRDBVMS040     --> DBTune V4.0 for Rdb on VAX/VMS
		DBTRDBVMS060     --> DBTune V6.0 for Rdb on VAX/VMS

		DBTRDBAXP053	 --> DBTune V5.3 for Rdb on AXP/VMS
		DBTRDBAXP052	 --> DBTune V5.2 for Rdb on AXP/VMS
		DBTRDBAXP040     --> DBTune V4.0 for Rdb on AXP/VMS
		DBTRDBAXP060     --> DBTune V6.0 for Rdb on AXP/VMS

		DBTRDBITA060	 --> DBTune V6.0 for Rdb on I64/VMS

		DBXRDBVMS051	 --> DBXAct V5.1 for Rdb on VAX/VMS
		DBXRDBVMS050	 --> DBXAct V5.0 for Rdb on VAX/VMS
		DBXRDBVMS039B	 --> DBXAct V3.9B for Rdb on VAX/VMS
		DBXRDBVMS060	 --> DBXAct V6.0 for Rdb on VAX/VMS

		DBXRDBAXP052	 --> DBXAct V5.2 for Rdb on AXP/VMS
		DBXRDBAXP051	 --> DBXAct V5.1 for Rdb on AXP/VMS
		DBXRDBAXP050	 --> DBXAct V5.0 for Rdb on AXP/VMS
		DBXRDBAXP039B	 --> DBXAct V3.9B for Rdb on AXP/VMS
		DBXRDBAXP060	 --> DBXAct V6.0 for Rdb on AXP/VMS

		DBXRDBITA060	 --> DBXact V6.0 for Rdb on I64/VMS

		EDPRDBAXP010	 --> ED pipe 1.0 for Rdb on AXP/VMS
		EDPRDBAXP011	 --> ED pipe 1.1 for Rdb on AXP/VMS
		EDPRDBAXP020	 --> ED pipe 2.0 for Rdb on AXP/VMS

		EDPRDBVMS010	 --> ED pipe 1.0 for Rdb on VAX/VMS
		EDPRDBVMS011	 --> ED pipe 1.1 for Rdb on VAX/VMS
		EDPRDBVMS020	 --> ED pipe 2.0 for Rdb on VAX/VMS

NOTE: VMS 6.2 users will find specially compiled kits in the vms62 folder on the CD. 
These should be used for VMS 6.2 only.

To install one of the above products, follow the steps below and
refer to the appropriate 'User Guide' supplied with the product for
more details on installation requirements:

	1) Mount the ISO-9660 CD using a command like...

$MOUNT/MEDIA=CDROM/UNDEFINED=(STREAM:2048)/OVER=ID <cd_device>: <label>

{Some versions of the OpenVMS OS may only require the /CDROM qualifier}

	2) Set up an unzip symbol with a command like:

	$ UNZIP :== "$<cd_device>:[000000]UNZIP_xxx.EXE"

	where xxx is either AXP or VAX depending on your system.

	3) Move to a temporary area to hold product savesets during 
the installation process.

	$ SET DEFAULT <hold_disk>:[<hold_dir>]

	where <hold_disk> and <hold_dir> represent the temporary area.

	4) Unzip the appropriate product file from the CD with a 
command like:

	$ UNZIP <cd_device>:[000000]<product>.ZIP
	
	where <product> is the product you wish to install, e.g. 
dbardbaxp052, dbtrdbvms040, etc.
	
	5) Install a particular product with the command:

$ @SYS$UPDATE:VMSINSTAL <product> <hold_disk>:[<hold_dir>]

	   where <product> is one of the products listed above.
	   For example, 
	$ @sys$update:vmsinstal DBTRDBVMS040 disk4:[scratch]

	6) After installation is complete, product files may be 
	   removed from the temporary area.  Refer to the User Guide
	   for instructions on how to run the product.


	NOTE: There are multiple versions of each product on this CD.
	      Ensure you install the proper product (version)
	      which supports your operating system and database version.
	      For example, DEC AXP - Open VMS with Rdb v6.1-04
	      requires DBARDBAXP039, DBTRDBAXP040, and DBXRDBAXP050.


================================================================================

Note: Any user running these tools under VMS 6.x who encounters a "library mismatch" or similar 
error should contact ALI (support@aliconsultants.com) for the appropriate corrective action.